Pro-Tek Made for Kawasaki Ninja ZX-10R ZX10R ZX 10R Fully Adjustable Lowering Links Made For 2004 2005 2006 2007 2008 2009 2010

You are looking at a Pro-tek CNC fully adjustable lowering link kit that replaces the stock links on a 2004-2010 Kawasaki Ninja ZX-10R ZX10R.These links lower the motorcycle frame, making it easier to mount and control for smaller riders,while making the bike more aerodynamic for those concerned with speed and performance.Both links are made of a 6061 T6 billet aluminum center and two stainless steel rod ends with adjusting nuts to tighten down when desired ride height is reached.The CNC made center piece is black anodized to protect against oxidation and corrosion.Stainless Steel rod ends are used with an aluminum center to protect against binding and seizing from metal on metal corrosion when threading.You Must USE your stock bolts. This kit does not come with bolts and nuts.Fully Adjustable Links allow you to make adjustments on the fly without having to unbolt the lowering link. You simply turn the center to find desired ride height and tighten down the adjusting nuts to secure in place. Its that easy.This kit is brand new, manufactured in the USA, and comes complete with manufacturer warranty.These links come with infinite settings that lower the bike from stock to 4".Maximum Closed Length (Eye Center to Eye Center) is 6.875” (175mm)Maximum Open Length (Eye Center to Eye Center) is 8” (203mm)Maximum Closed Length (End to End) is 8.25” (210mm)Maximum Open Length (End to End) is 9.375” (238mm)NOTE: NOT FOR USE WITH STRUT, AIR RIDE OR SWINGARMS LONGER THAN 8" OVER STOCK LENGTH!**Note: For Fully Adjustable Lowering Links, you may have to loosen the top and/or bottom shock bolts (without removing) to realign with link during link installation. There is wiggle room in shock bolts if shock is touching the link. However, when adjusting the bike extremely low, some bikes may need a slight amount of material removed from the bottom of the shock mount for clearance.

• Comes with Stainless Steel Rod Ends and aluminum spacers for easy bolt on.
• Lowers bike from stock to four inches with turn of center piece.
• Steel rod ends used with anodized aluminum middle to prevent metal seizing.